|
![]() ![]() ![]() ![]() ![]() |
![]() |
Use the refillable Applicator to apply (1 to 2 oz.) of Bucket In A Bottle TM Solution evenly across one side of th e scrubber (fig. 1). | ||||||||||
|
|||||||||||
![]() |
![]() |
![]() |
![]() |
| Place squeegee in upper left corner of the window approximately 6" from the side (fig. 5) pull squeegee across and end at right side (fig. 6).
Return the squeegee to the left side of the window, just below the starting point of the first stroke overlapping by approximately 1" (fig. 7, 8). Repeat this step until all that is left is the 6" strip of moisture down the left side. | |||
![]() |
Wipe Squeegee Off |
![]() |
![]() |
| Wipe the squeegee off with a towel (fig. 9), and return it to the top left corner. (fig. 10) Pull the squeegee down slowly and evenly to the bottom sill Any remaining moisture on the glass can be wiped off with a clean dry towel. | |||
| Extention Pole Method |
Place
scrubber on pole and wash the window thoroughly. Put squeegee on pole and
place it in the upper left corner (fig.
E1). Pull squeegee down to eye level (fig.
E2). Wipe squeegee off with towel and return to top of window. Overlap
previous stroke by approximately 2", pull down. Repeat until top of window
is complete. Finish bottom of window with original method. |
|
|
| SCRAPPING TIPS & CAUTIONS: |
|